[Chewiegum] Collection

Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore




Darth Vader ANH Dual Signature Edition SW-106S
Darth Vader TESB Signature Edition SW-117S
Darth Vader ROTJ Signature Edition SW-164SE
Luke Skywalker ANH Elite Edition SW-135
Luke Skywalker ANH Signature Edition SW-148S
Luke Skywalker TESB Signature Edition SW-110S
Luke Skywalker ROTJ Elite Edition SW-127
Luke Skywalker Version 2 ROTJ Signature Edition SW-171SE
Obi-Wan Kenobi "As First Built By" ANH Limited Edition SW-118
Obi-Wan Kenobi Weathered ANH Limited Edition SW-109


Boba Fett ROTJ Signature Edition SW-159SE
Han Solo ANH limited Edition SW-101

Han Solo ANH Elite Edition SW-160EE
Han Solo TESB Limited Edition SW-134
Luke Skywalker TESB Limited Edition SW-169
Princess Leia ANH Signature Edition SW-122S
Rebel Trooper ANH Limited Edition SW-125
Stormtrooper ANH Limited Edition SW-126


AT-AT Walker TESB Signature Edition SW-136-P

AT-ST Walker ROTJ Limited Edition
Darth Vader's TIE Fighter ANH Signature Edition

Millennium Falcon ANH Limited Edition
Millennium Falcon TESB Signature Edition SW-155SE
Millennium Falcon TESB Limited Edition
Rebel Snowspeeder TESB Limited Edition SW-124
Rebel Y-Wing ANH Limited Edition SW-154
Slave 1 TESB Signature Edition
TIE Fighter ANH Limited Edition
X-Wing Starfighter ANH Signature Edition
X-Wing Starfighter ANH Signature Edition


Boba Fett TESB Signature Edition SW-156SE
Darth Vader ANH Limited Edition
Stormtrooper ANH Limited Edition SW-153LE-P


Boba Fett TESB MMS574 1/6 Scale Figure

Chewbacca ANH MMS263 1/6 Scale Figure

Darth Vader ANH MMS434 1/6 Scale Figure
Grand Moff Tarkin ANH MMS434 1/6 Scale Figure
Han Solo ANH MMS263 1/6 Scale Figure

Han Solo TESB Hoth Exclusive Blue Jacket 1/6 Scale Figure
Imperial TIE Fighter Pilot ANH Exclusive 1/6 Scale Figure

Jabba the Hutt with Bib Fortuna ROTJ Limited Edition Statue
Luke Skywalker TESB Hoth Exclusive 1/6 Scale Figure
Luke Skywalker ANH X-Wing Pilot Exclusive 1/6 Scale Figure
Obi-Wan Kenobi ANH MMS283 1/6 Scale Figure
Princess Leia TESB Hoth 1/6 Scale Figure
R2-D2 ANH Exclusive 1/6 Scale Figure

Rancor ROTJ Signature Edition Prop Replica

Stormtrooper ANH Exclusive MMS268 1/6 Scale Figure
Tauntaun TESB Deluxe 1/6 Scale Figure


Death Star Surface Piece ANH Screen Used Prop
Docking Bay 94 ANH Wall Decor Plaque
Jedi Training Remote ANH Limited Edition SW-107
Medal of Yavin ANH Limited Edition SW-119
Mythosaur Skull TESB Wall Decor
Thermal Detonator "As First Built" ROTJ Limited Edition SW-115P
Thermal Detonator ROTJ Signature Edition SW-115S


Carrie Fisher ANH Framed Script Page
Darth Vader Lightsaber Blueprint ANH Limited Edition SW-106
Han Solo Blaster Blueprint ANH Limited Edition SW-101
Leia: Princess of Alderaan ANH Art Print
Luke Skywalker Lightsaber Blueprint ROTJ Limited Edition SW-102
Star Wars ANH Poster Premium 35g Silver Collectible
Star Wars TESB Poster Premium 35g Silver Collectible
Star Wars ROTJ Poster Premium 35g Silver Collectible


Alec Guinness on Photo Q26013
Angus MacInnes on Rebel Y-Wing Plaque
Billy Dee Williams on Millennium Falcon Plaque
Brian Muir on Darth Vader Life-Size Helmet Plaque
Frank Oz on Photo AB92112
Peter Cushing on Cut A29228
Harrison Ford Han Solo Blaster Plaque P95194
Harrison Ford Millennium Falcon Plaque P95195
Ian McDiarmid on Photo AB64318
Jim Dowdall on Stormtrooper Blaster Plaque
Jim Dowdall on Stormtrooper Life-Size Helmet Plaque
Lorne Peterson on TIE Fighter Plaque

Peter Mayhew/Anthony Daniels/Kenny Baker on Photo AE71977
Robert Watts on AT-ST Walker Plaque


Chris​
 
Last edited:
Joined
Jul 16, 2013
Messages
3,144
Reaction score
760
Location
Nitro Circus
Wow, what a STUNNING collection! Beautifully displayed, no clutter. Just perfect! Excellent pieces as well!

Ironic your helmets are of the core three characters I collect (Boba Fett, Darth Vader and OT Stormtrooper). Kudos, great job!

PS) I also love the Battlestar Galactica helmet and the SS comic book pieces as well.
 
Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore
I might pick up a real grail today, I will know at 4 p.m. today, need to check whether it's completely mint, complete and no fake first. Fingers crossed.
Chris
 
Joined
Jan 22, 2017
Messages
4,212
Reaction score
3,559
I might pick up a real grail today, I will know at 4 p.m. today, need to check whether it's completely mint, complete and no fake first. Fingers crossed.
Chris
Maybe have someone else drink from it first?
I can't help but think of the grail scene from Indiana Jones....lol. Good luck a lot of love and hard work went into your collection, and it shows.
 
Joined
Jan 27, 2009
Messages
1,771
Reaction score
108
Location
Sarlacc Pit of Carkoon
Great collection and displayed very well. I don't even want to think about how much you've spent in the last three years at aftermarket prices. Sounds like you flipped a good portion of your DC/Marvel collection. I'm sure that helped based off what you have remaining. Speaking of which, I'm not a comic book guy, but as a collector of things, I can appreciate any nice collection.

Question - what Rancor maquette are you referring too? Since I "completed" my collection years ago I'm kinda outta the loop, but I may need to get back in.
 
Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore
Maybe have someone else drink from it first?
I can't help but think of the grail scene from Indiana Jones....lol. Good luck a lot of love and hard work went into your collection, and it shows.
Thanks, but I took the risk myself and it was a success ^^, I now own a Master Replicas Millennium Falcon, complete, with all boxes, SE, even the advertisements were still inside, never opened. Displayed for only 2 months and than stored for about 13 years. Lights all work fine, no dust, everything like new. It's as miracle. :love:
Before I display him I will have an acrylic cover made, does anyone here have the exact dimensions for this?
Chris
 
Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore
Great collection and displayed very well. I don't even want to think about how much you've spent in the last three years at aftermarket prices. Sounds like you flipped a good portion of your DC/Marvel collection. I'm sure that helped based off what you have remaining. Speaking of which, I'm not a comic book guy, but as a collector of things, I can appreciate any nice collection.

Question - what Rancor maquette are you referring too? Since I "completed" my collection years ago I'm kinda outta the loop, but I may need to get back in.
Thanks a lot. Yes I needed to sell a lot of DC/Marvel 3 years ago, it completely covered my expenses for Star Wars + I still have some of that money to spend. I was a completist for Marvel, LotR, Star Wars, Street Fighter, Warhammer and DC Statues of all kind. So I sold about 100-120 of them when they still had a good value. Nowadays the aftermarket prices are not even 1/3 of what they used to be when I sold everything.

It's this Rancor:


Hope to score one on the aftermarket fopr less.

Chris
 
Joined
Jul 16, 2013
Messages
3,144
Reaction score
760
Location
Nitro Circus
Thanks a lot. Yes I needed to sell a lot of DC/Marvel 3 years ago, it completely covered my expenses for Star Wars + I still have some of that money to spend. I was a completist for Marvel, LotR, Star Wars, Street Fighter, Warhammer and DC Statues of all kind. So I sold about 100-120 of them when they still had a good value. Nowadays the aftermarket prices are not even 1/3 of what they used to be when I sold everything.

It's this Rancor:


Hope to score one on the aftermarket fopr less.

Chris
That piece looks incredible. Not something I personally collect, but I can see how well done it is. Best of luck!!
 
Joined
Jan 27, 2009
Messages
1,771
Reaction score
108
Location
Sarlacc Pit of Carkoon
Thanks a lot. Yes I needed to sell a lot of DC/Marvel 3 years ago, it completely covered my expenses for Star Wars + I still have some of that money to spend. I was a completist for Marvel, LotR, Star Wars, Street Fighter, Warhammer and DC Statues of all kind. So I sold about 100-120 of them when they still had a good value. Nowadays the aftermarket prices are not even 1/3 of what they used to be when I sold everything.

It's this Rancor:


Hope to score one on the aftermarket fopr less.

Chris
Ahh ok. Looks like its a statue vs a maquette. When I think maquette, I'm thinking of the ones GL would look over and approve in those making of specials back in the day. Like these Jabba concepts.

Screenshot_20200112-174000~2.png

Don't get me wrong, that Rancor is gorgeous, just doesn't fit my prop replica theme.

Hey congrats on the MR MF! I almost had a SE, but i got hoodwinked. I'm envious.
 
Joined
Sep 17, 2015
Messages
920
Reaction score
327
Location
Arizona
Chris that is one HUGE grail. I would love to have it as well but the footprint is just too much for my den!!!! However Congrats !!!! GC
 
Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore
I almost had a SE, but i got hoodwinked.
That is the reason why I needed to see him myself before I bought it. It seems that his father passed away +- 2 months after the Falcon was shipped, then he got him as an heirloom and never displayed it, now his wife needed a new horse saddle so he sold the Falcon. Now I'll give him a nice new home as a centerpiece like the MF deserves it.

Chris that is one HUGE grail. I would love to have it as well but the footprint is just too much for my den!!!! However Congrats !!!! GC
Yes the footprint is enormous, I would not have bought when I could not display him properly. That's very important to me.
Chris
 
Joined
Jan 13, 2015
Messages
8
Reaction score
3
Great collection and displayed very well! Good pictures also. It's nice you have a dedicated room. Congrats on The Falcon! Wish I picked one up for MSRP lol.
 
Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore
Since I have been asked:

in case someone would like to get a pedestral done like this or smaller.

Step 1 is the pedestral itself, this site is maybe just for Europe, but I am sure this exists for the US, Asia, ... as well:
You can get them raw (very cheap) or already colored etc...


Step 2 is to put on the primer, which is VERY important to avoid that the plaster comes of again after a while, I used that one (very cheap). Actually the same one I used in my house.


Step 3 is the roll-on plaster for indore use, I used a raw one in combination with a regular paint roller:


Step 4 is just the painting of the color you like best.

Chris
 
Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore
Display for the Falcon is almost ready, only missing is the acrylic cover that will arrive next week saturday and I will have a bluprint of the Falcon printed behind glas that will be attached to the pedestral with distance bolts.

Here are pics of the Falcon, I can tell that he is worth the money (if eFX would make one today without Ford Signature it might be the same price as I payed for this one)! In person he looks MUCH better than on pictures, I hope I could capture him properly.

Next ist the AT-AT-Walker and also the Y-Wing now, I think I won't be after the BSG Viper anymore since I need the space for more Star Wars ^^. I might even sell the dual signed eFX BSG Pilot Helmet.




















Chris
 
Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore
The cover arrived yesterday and it fits perfectly, my Falcon display is almost done now. I will get another blueprint that I created from an existing one.
the blueprint will be printed on glas and it will be mounted to the base with a distance of +- 1 cm.


Chris
 
Last edited:
Joined
Jun 7, 2017
Messages
1,088
Reaction score
499
Location
Mandalore
Just sent this to a company in Germany to recreate a glasbase + cover for the screen used Death Star piece I gor from PropStore.







Chris
 
Top